Aluphonic – 10mm

ALUTHERMO® ALUPHONIC

 

Thin, multi-reflector insulation composed of two layers of pure aluminium 30-microns thick, polished and treated against oxidation, separated by two layers of air bubbles placed in a honeycomb structure and enclosed in a self-extinguishing polyethylene film and a self-extinguishing and waterproof polyethylene foam.

The various layer are thermally welded together over their full surface.

How does it work ?

The obtained complex is semi-rigid and consists of the following successive layers:

  1. A film of pure aluminium, 30 microns thick, treated against oxidation.
  2. A layer of bubbles of dry air enclosed in self-extinguishing polyethylene.
  3. A foam of self-extinguishing and waterproofed polyethylene.
  4. A layer of bubbles of dry air enclosed in self-extinguishing polyethylene.
  5. A film of pure aluminium, 30 microns thick, treated against oxidation.

aluthermo aluphonic

The air trapped in the bubble film and polyethylene foam is dry and stable. Possible condensation is therefore always avoided within the usual range of temperatures for ALUTHERMO®.

Technical characteristics

 

Thickness 10 mm
Diameter of the bubbles 10 mm
Height of the bubbles 4 mm
Thickness of the polyethylene film 150 microns
Number of aluminium films 2
Thickness of the polyethylene foam 3 mm
Thickness of the outer aluminium film 30 microns
Dimensions of the roll 1,20 x 20 m
Surface area per roll 24,00 m²
Weight ± 670 g/m²
Operating temperature range -40°C to +80°C
Emissivity 0,05
Fire classification
(Standard NF P 92-501)
A1
Equivalent thermal resistance See Study of the RWTH Aachen

 

Insulate with Aluthermo® products

Find our thin insulators at our partners and distributors

Find a retailer